EMI filtering and conducted EMI pre-compliance measurements

AN3063

28/33

Doc ID 16261 Rev 3

As visible in the diagrams, in all test conditions there is a good margin of the measures with

respect to the limits. The measurements have been done in peak detection to speed up the

sweep, otherwise taking a long time. Please note that the measurements done in quasi-

peak or average as required by the regulation will be much lower because of the jittering

effect of the TM control that cannot be evaluated in peak detection.

Figure 38.

EVL6563H-100W CE peak

measurement at 230 Vac, 50 Hz, full

load, phase

Figure 39.

EVL6563H-100W CE peak

measurement at 230 Vac, 50 Hz, full

load, neutral