EMC2113 datasheet(21/88 Pages) MICROCHIP

部品番号	EMC2113

部品情報	RPM-Based Fan Controller with Multiple Temperature Zones & Hardware Thermal Shutdown

PDF	88 Pages

Scroll/Zoom	100%

メーカー	MICROCHIP [Microchip Technology]

ホームページ	http://www.microchip.com

Logo

21 / 88 page

RPM-Based Fan Controller with Multiple Temperature Zones & Hardware Thermal Shutdown

Datasheet

 2013 Microchip Technology Inc.

DS20005251A-page 21

5.2.7

Alert Response Address

The ALERT output can be used as a processor interrupt or as an SMBus Alert when configured to

operate as an interrupt.

When it detects that the ALERT pin is asserted, the host will send the Alert Response Address (ARA)

to the general address of 0001_100b. All devices with active interrupts will respond with their slave

address as shown in Table 5.9.

The EMC2113 slave interface will respond to the ARA in the following way if the ALERT pin is asserted.

1. Send Slave Address and verify that full slave address was sent (i.e. the SMBus communication

from the device was not prematurely stopped due to a bus contention event).

2. Set the MASK bit to clear the ALERT pin.

Table 5.9 Alert Response Address Protocol

START

ALERT

RESPONSE

ADDRESS

ACK

DEVICE

ADDRESS

NACK

STOP

1 -> 0

0001_100

YYYY_YYY

0 -> 1

EMC2113 データシート(PDF) 21 Page - Microchip Technology