| データシートサーチシステム |
|
LSM6DS33TR データシート(PDF) 23 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
LSM6DS33TR データシート(HTML) 23 Page - STMicroelectronics |
|
23 / 77 page ![]() DocID027423 Rev 4 23/77 LSM6DS33 Functionality 77 5 Functionality 5.1 Operating modes The LSM6DS33 has three operating modes available: only accelerometer active and gyroscope in power-down only gyroscope active and accelerometer in power-down both accelerometer and gyroscope sensors active with independent ODR The accelerometer is activated from power down by writing ODR_XL[3:0] in CTRL1_XL (10h) while the gyroscope is activated from power-down by writing ODR_G[3:0] in CTRL2_G (11h). For combo mode the ODRs are totally independent. 5.2 Gyroscope power modes In the LSM6DS33, the gyroscope can be configured in four different operating modes: power-down, low-power, normal mode and high-performance mode. The operating mode selected depends on the value of the G_HM_MODE bit in CTRL7_G (16h). If G_HM_MODE is set to ‘0’, high-performance mode is valid for all ODRs (from 13 Hz up to 1.6 kHz). To enable the low-power and normal mode, the G_HM_MODE bit has to be set to ‘1’. Low- power mode is available for lower ODR (13, 26, 52 Hz) while normal mode is available for ODRs equal to 104 and 208 Hz. 5.3 Accelerometer power modes In the LSM6DS33, the accelerometer can be configured in four different operating modes: power-down, low-power, normal mode and high-performance mode. The operating mode selected depends on the value of the XL_HM_MODE bit in CTRL6_C (15h). If XL_HM_MODE is set to ‘0’, high-performance mode is valid for all ODRs (from 13 Hz up to 6.66 kHz). To enable the low-power and normal mode, the XL_HM_MODE bit has to be set to ‘1’. Low- power mode is available for lower ODRs (13, 26, 52 Hz) while normal mode is available for ODRs equal to 104 and 208 Hz. 5.4 FIFO The presence of a FIFO allows consistent power saving for the system since the host processor does not need continuously poll data from the sensor, but it can wake up only when needed and burst the significant data out from the FIFO. LSM6DS33 embeds 8 kbytes data FIFO to store the following data: gyroscope accelerometer step counter and time stamp temperature |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |