DESCRIPTION
The ILD620, ILQ620, ILD620GB, and ILQ620GB are
multi-channel input phototransistor optocouplers that use
inverse parallel GaAs IRLED emitter and high gain NPN
silicon phototransistors per channel. These devices are
constructed using over/under leadframe optical coupling
and double molded insulation resulting in a withstand test
voltage of 5300 VRMS.
The LED parameters and the linear CTR characteristics
make these devices well suited for AC voltage detection.
The ILD620GB and ILQ620GB with its low IF guaranteed
CTRCEsat minimizes power dissipation of the AC voltage
detection network that is placed in series with the LEDs.
Eliminating the phototransistor base connection provides
added electrical noise immunity from the transients found in
many industrial control environments.

FEATURES
• Identical channel to channel footprint
• ILD620 crosses to TLP620-2
• ILQ620 crosses to TLP620-4
• High collector emitter voltage, BVCEO = 70 V
• Dual and quad packages feature:
- Reduced board space
- Lower pin and parts count
- Better channel to channel CTR match
- Improved common mode rejection
• Isolation test voltage 5300 VRMS
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912

AGENCY APPROVALS
• UL1577, file no. E52744 system code H, double protection
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884)
• FIMKO
• CQC GB4943.1-2011 and GB8898:2011 (suitable for
installation altitude below 2000 m)