CSM_M7F_DS_E_10_1

1

Digital Display

M7F

A Series of Three- to Five-digit Digital

Display Units with a Character Height of

14 mm. Models available with either red or

green displays.

• Red or green displays with a character height of 14 mm are

available for a variety of applications and locations.

• Miniature design with a 50-mm depth.

• Incorporating a connector, thus saving wiring effort.

• Connecting to OMRON's PLCs via dedicated PLC cables (sold

separately).

• Units and minus symbols are displayed (three- and four-digit

model only).

• Incorporating a zero suppression function.

• The power supply can freely change between 12 and 24 VDC.

• CE Marking. UL certification approval.

Model Number Structure

■ Model Number Legend

Construction and Nomenclature

■ Nomenclature

s

12 3 45

M7F-

@@@@@

1. No. of Numeral Display Digits

(No. of 7-segment LED Indicators)

2. Input Method

3. LED

4. Display Color

5. Display Contents

Note: 1. The input type for the five-digit model is dynamic only.

2. Dynamic input is available with the four-digit model as well as the five-

digit model.

3. The minus symbol and units are available with three and four-digit

models only.

4. Three-digit models with numerals only are not available.

Code

No. of digits

3

3 digits

4

4 digits

5

5 digits

Code

Input Method

P

Static positive logic

N

Static negative logic

D

Dynamic

Code

Character Height

1

14 mm

Code

Color

R

Red

G

Green

Code

Display Contents

F

Numerals and minus symbol

T

Numerals and units

None

Numerals only

DIP Switch

I/O Connector

(OMRON's XG4A-2031)

Connect 12 to 24 VDC.

Seven-segment LED

Character height: 14 mm

Color:

Red or green

Character:

Numerals only

Numerals and minus symbol (for three- and four-digit models only)

Numerals and units (for three- and four-digit models only)

Power Supply Terminal

Use with OMRON's XG4M-2030-T, XG5M-2032-N, XG5M-2035-N or

equivalent socket.

Connected to OMRON's PLCs with ease by using OMRON's

G79-

@C, G79-Y@C, or G79-O@C-@ Cable. Refer to page 3 for details.

Used for decimal point and negative value settings.

Refer to page 6 for details.