M7F

4

Specifications

■ Applicable EN Standards

■ Ratings

Note: Use an NPN open collector for the output of the connection

device. The data signal, however, is positive logic and the

strobe signal is negative logic.

■ Characteristics

Note: Impulse conditions:

Rise time:

1 ns +10% max.

Pulse width: 100 ns, 1

µs

Frequency: 100 Hz

Polarity:

Positive or negative

Cable:

OMRON's G79-100C

Standards

EN61326

EN60529

UL61010-1

Rated power supply

12 to 24 VDC

Allowable voltage fluctuation range 90% to 110% of rated voltage

Current consumption

200 mA max. (at 12 VDC)

100 mA max. (at 24 VDC)

Input level

Static

input

Positive

High: 9.6 V to power supply voltage

Low: 0 to 3 V

Negative

High: 4 V to power supply voltage

Low: 0 to 1.5 V

Dynamic

input

Positive

(See note.)

High: 4 V to power supply voltage

Low: 0 to 1.5 V

Ambient temperature

Operating:

−10 to 55°C (with no icing

or condensation)

Storage:

−25 to 65°C (with no icing or

condensation)

Ambient humidity

Operating: 35% to 85% (with no icing

or condensation)

Insulation

resistance

100 M

Ω min. (at 500 VDC) between each terminal and

mounting panel

Dielectric

strength

1,000 VAC, 50/60 Hz for 1 min between each terminal

and mounting panel

Noise

immunity

(See note.)

Power terminal:

±500 V (normal mode)

±1,500 V (common mode)

I/O cable:

±800 V (when the specified cable is

used)

Vibration

resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude

10 sweeps of 5 min each in X, Y, and Z directions

Shock

resistance

3 times each in 6 directions on X, Y, and Z axes

Degree of

protection

IEC IP40 (front panel only)