GD25LE256DWJS datasheet(27/83 Pages) GIGADEVICE

部品番号	GD25LE256DWJS

部品情報	1.8V Uniform Sector Dual and Quad Serial Flash

PDF	83 Pages

Scroll/Zoom	100%

メーカー	GIGADEVICE [GigaDevice Semiconductor (Beijing) Inc.]

ホームページ	http://www.gigadevice.com/

Logo

27 / 83 page

1.8V Uniform Sector

Dual and Quad Serial Flash

GD25LE256D

Fast Read (0BH) in QPI mode

The Fast Read command is also supported in QPI mode. In QPI mode, the number of dummy clocks is configured by

the

“Set Read Parameters (C0H)” command to accommodate a wide range application with different needs for either

maximum Fast Read frequency or minimum data access latency. Depending on the Read Parameter Bits P[5:4] setting, the

number of dummy clocks can be configured as either 4/6/8/8.

Figure10a. Read Data Bytes at Higher Speed Sequence Diagram (QPI)

CS#

SCLK

IO0

IO1

IO2

IO3

Command

0BH

A23-16 A15-8

A7-0

Dummy*

12 13

IOs switch from

Input to output

Byte1

*"Set Read Parameters" Command (C0H)

can set the number of dummy clocks

Dummy*

Note: The device default is in 24-bit address mode. For 4-byte mode, the address length becomes 32-bit.

GD25LE256DWJS データシート(PDF) 27 Page - GigaDevice Semiconductor (Beijing) Inc.