| データシートサーチシステム |
|
RT9758 データシート(PDF) 1 Page - Richtek Technology Corporation |
|
|
|||||||||||||||||||||||||||||
RT9758 データシート(HTML) 1 Page - Richtek Technology Corporation |
|
1 / 61 page ![]() RT9758 Copyright © 2023 Richtek Technology Corporation. All rights reserved. is a registered trademark of Richtek Technology Corporation. DS9758-03 May 2023 www.richtek.com 1 High Voltage Smart Cap Divider and Direct Charge Charger General Description The RT9758 is a high efficiency and high charge current charger for high voltage application. The efficiency is up to 98.1% when VOUT = 10V, IOUT = 2A, switching frequency = 500kHz, dual phase with VBUS input in cap divider mode. The RT9758 maximum charge current is up to 5A. The device integrates cap divider topology (DIV2 mode), direct charge topology (Bypass mode), an input reverse blocking NFET, a dual-phase charge pump core, the EN pin control and 9-way protection. In present mode (EN = H), the host can still order the command by I2C serial interface. Applications ⚫ Smart Phones ⚫ Tablet ⚫ PC Ordering Information Package Type WSC : WL-CSP-36B 2.74x2.84 (BSC) RT9758 Note : Richtek products are : RoHS compliant and compatible with the current requirements of IPC/JEDEC J-STD-020. Suitable for use in SnPb or Pb-free soldering processes. Features ⚫ Integrated Bidirectional Bypass Mode and Cap Divider Mode (DIV2 Mode) ⚫ Input Reverse Blocking NFET between WRX_IN Pin and VBUS Pin Block the Reverse Current ⚫ Dual-Phase Charge Pump Core 5A Output Current Capability Efficiency Up to 98.1% when VOUT = 10V, IOUT = 2A, Switching Frequency = 500kHz and Dual Phase with VBUS Input in DIV2 Mode 300kHz to 1.5MHz Variable Switching Frequency Stay Out of Audio Band Spread Spectrum Technology for EMI Reduction Adjustable Single-Phase or Dual-Phase for DIV2 Mode Programmable Pre-Charge Current and Pre- Charge Timing for Charge Soft-Start Support Converter Soft-Start with 200mA Loading ⚫ Support Synchronize Function for Parallel Application ⚫ Operation Mode Transfer Automatically between Bypass Mode and DIV2 Mode (AT_Function) ⚫ I2C is Available when Device in Present Mode ⚫ 3-Error Charge Pump Switch Protection VBUS Voltage Too Low Error Protection before Switch (VBUS_LOW_ERR) CFLY Short Error Protection Before Switch (CFLY_DIAG) Converter Over-Current Protection (CON_OCP) ⚫ 6-Way System Protection VBUS Over-Voltage Protection (VBUS_OVP) IBUS Over-Current Protection (IBUS_OCP) VOUT Over-Voltage Protection (VOUT_OVP) WRX Reverse Over-Current Protection (WRX_IRE_OCP) VOUT Short Error Protection Before Charge (VOUT_ERR) Junction Over-Temperature Protection (TDIE_OTP) |
同様の部品番号 - RT9758 |
|
同様の説明 - RT9758 |
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |