M65KA128AL datasheet(23/53 Pages) STMICROELECTRONICS

23 / 53 page

M65KA128AL

DC and AC parameters

23/53

DC and AC parameters

This section summarizes the operating and measurement conditions, and the DC and AC

characteristics of the device. The parameters in the DC and AC characteristics Tables that

follow, are derived from tests performed under the Measurement Conditions summarized in

Table 7: Operating and AC Measurement Conditions. Designers should check that the

operating conditions in their circuit match the measurement conditions when relying on the

quoted parameters.

Figure 3.

AC Measurement I/O Waveform

Table 7.

Operating and AC Measurement Conditions

Parameter(1)(2)

All voltages are referenced to VSS = 0V.

TJ = –25 to 90°C, f = 1MHz

M65KA128AL

Units

Min

Typ

Max

Supply Voltage (VDD)

1.65

1.8

1.95

Input/Output Supply Voltage (VDDQ)

(3)

VDDQ must not exceed the level of VDD.

1.65

1.8

1.95

Junction Temperature (TJ)–25

°C

Load Capacitance (CL)30

Output Impedance (Z0)50

Ω

Input Rise/Fall Time (tR, tF)1

Input High Voltage (VIH)1.6

Input Low Voltage (VIL)0.2

Input and Output Timing Ref. Voltages

VDDQ/2

Output Transition Timing Reference Voltages

0.3VDDQ

0.7VDDQ

AI08009

VDDQ

I/O Timing Reference Voltage

VDDQ/2

VDDQ

Output Transition Timing Reference Voltage

0.7VDDQ

0.3VDDQ

M65KA128AL データシート(PDF) 23 Page - STMicroelectronics

M65KA128AL データシート(HTML) 23 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

データシートダウンロード