データシートサーチシステム
  Japanese  ▼
ALLDATASHEET.JP

X  

ISD5216PI データシート(PDF) 20 Page - Winbond

部品番号 ISD5216PI
部品情報  8 to 16 minutes voice record/playback device with integrated codec
PDF  75 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
メーカー  WINBOND [Winbond]
ホームページ  http://www.winbond.com
Logo WINBOND - Winbond

ISD5216PI データシート(HTML) 20 Page - Winbond

Back Button ISD5216PI Datasheet HTML 16Page - Winbond ISD5216PI Datasheet HTML 17Page - Winbond ISD5216PI Datasheet HTML 18Page - Winbond ISD5216PI Datasheet HTML 19Page - Winbond ISD5216PI Datasheet HTML 20Page - Winbond ISD5216PI Datasheet HTML 21Page - Winbond ISD5216PI Datasheet HTML 22Page - Winbond ISD5216PI Datasheet HTML 23Page - Winbond ISD5216PI Datasheet HTML 24Page - Winbond Next Button
Zoom Inzoom in Zoom Outzoom out
 20 / 75 page
background image
ISD5216
- 20 -
7.4. I2S SERIAL INTERFACE
As shown in the following figure, the bus has three lines:
•
continuous serial clock (SCK)
•
word select (WS)
•
serial data (SDIO)and the device generating SCK and WS is the master.
Simple System Configurations and Basic Interface Timing
7.4.1. Serial Data
Serial data is transmitted in two’s complement with the MSB first. The MSB is transmitted first
because the transmitter and receiver may have different word lengths. It isn’t necessary for the
transmitter to know how many bits the receiver can handle, nor does the receiver need to know how
many bits are being transmitted.
When the system word length is greater than the transmitter word length, the word is truncated (least
significant data bits are set to ‘0’) for data transmission. If the receiver is sent more bits than its word
length, the bits after the LSB are ignored. On the other hand, if the receiver is sent fewer bits than its
word length, the missing bits are set to zero internally. And so, the MSB has a fixed position, whereas
the position of the LSB depends on the word length. The transmitter always sends the MSB of the
next word one clock period after the WS changes.
Serial data sent by the transmitter may be synchronized with either the trailing (HIGH-to-LOW) or the
leading (LOW-to-HIGH) edge of the clock signal. However, the serial data must be latched into the
receiver on the leading edge of the serial clock signal, and so there are some restrictions when



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75


データシート ダウンロード

Go To PDF Page


リンク URL



ALLDATASHEETはお客様のビジネスに役立ちますか?  [ DONATE ] 

Alldatasheetは   |   広告   |   お問い合わせ   |   プライバシーポリシー   |   データシートへのリンク    |   リンク交換   |   メーカーリスト
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com