| データシートサーチシステム |
|
STW81101AT データシート(PDF) 13 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STW81101AT データシート(HTML) 13 Page - STMicroelectronics |
|
13 / 48 page ![]() STW81101 Electrical specifications 13/48 An evaluation kit is available upon request, including a powerful simulation tool (STWPLLSim) that allows a very accurate estimation of the device’s phase noise according to the desired project parameters (VCO frequency, selected output stage, reference clock, frequency step, and so on); refer to Chapter 8: Application information for more details. VCO A with divider by 2 (1650MHz-1950MHz) – open loop(3) Phase noise @ 1 kHz -62 dBc/Hz Phase noise @ 10 kHz -89 dBc/Hz Phase noise @ 100 kHz -112 dBc/Hz Phase noise @ 1 MHz -135 dBc/Hz Phase noise @ 10 MHz -151.5 dBc/Hz Phase noise floor @ 40 MHz -155 dBc/Hz VCO B with divider by 2 (1900MHz-2200MHz) – open loop(3) Phase noise @ 1 kHz -61 dBc/Hz Phase noise @ 10 kHz -89 dBc/Hz Phase noise @ 100 kHz -112 dBc/Hz Phase noise @ 1 MHz -134 dBc/Hz Phase noise @ 10 MHz -151.5 dBc/Hz Phase noise floor @ 40 MHz -155 dBc/Hz VCO A with divider by 4 (825MHz-975MHz) – open loop(3) Phase noise @ 1 kHz -68 dBc/Hz Phase noise @ 10 kHz -95 dBc/Hz Phase noise @ 100 kHz -118 dBc/Hz Phase noise @ 1 MHz -141 dBc/Hz Phase noise @ 10 MHz -154 dBc/Hz Phase noise floor @ 40 MHz -155 dBc/Hz VCO B with divider by 4 (950MHz-1100MHz) – open loop(3) Phase noise @ 1 kHz -67 dBc/Hz Phase noise @ 10 kHz -95 dBc/Hz Phase noise @ 100 kHz -118 dBc/Hz Phase noise @ 1 MHz -140 dBc/Hz Phase noise @ 10 MHz -154 dBc/Hz Phase noise floor @ 40 MHz -155 dBc/Hz 1. Phase noise SSB. VCO amplitude setting to value [11]. All the closed-loop performances are specified using a reference clock signal at 76.8 MHz with phase noise of -135dBc/Hz @1kHz offset, -145dBc/Hz @10kHz offset and -149.5dBc/Hz of noise floor. 2. Normalized PN = Measured PN – 20log(N) – 10log(FPFD) where N is the VCO divider ratio (N=B*P+A) and FPFD is the comparison frequency at the PFD input 3. Typical Phase Noise at centre band frequency Table 6. Phase noise specification (continued) Parameter Test conditions Min Typ Max Unit |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |