CHR71000 datasheet(52/54 Pages) AMSOSRAM

52 / 54 page

CHR71000

Soldering & storage information

Datasheet • PUBLIC • Document Feedback

DS000427 • v2-01 • 2026-Mar-18

52 / 54

11.3

Storage

Image sensors should be stored under the following conditions:

•

Dust free

•

Temperature 20°C to 40°C

•

Humidity between 30% and 60%

•

Avoid radiation, electromagnetic fields, ESD, mechanical stress

11.4

Additional information

11.4.1

ESD

The following are the recommended minimum ESD requirements when handling image

sensors:

•

Ground workspace (tables, floors…)

•

Ground handling personnel (wrist straps, special footwear…)

•

Minimize static charging (control humidity, use ionized air, wear gloves…)

11.4.2

Glass cleaning

When cleaning of the cover glass is needed we recommend the following two methods.

•

Blowing off the particles with ionized nitrogen.

•

Wipe clean using IPA (isopropyl alcohol) and ESD protective wipes.

11.4.3

Excessive light

Excessive light falling on the sensor can cause heating up the micro lenses and color filters.

This heat can cause deforming of the lenses and/or deterioration of the lenses and color filters

by making them more opaque, increasing the heat up even more. Avoid shining high intensity

light upon the sensors for extended periods of time. In case of lasers, they can cause heat up

but can also damage the silicon die itself.

CHR71000 データシート(PDF) 52 Page - ams-OSRAM AG

CHR71000 データシート(HTML) 52 Page - ams-OSRAM AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

データシートダウンロード