1.

General description

The 74HC4053; 74HCT4053 is a triple single-pole double-throw analog switch (3x SPDT)

suitable for use in analog or digital 2:1 multiplexer/demultiplexer applications. Each switch

features a digital select input (Sn), two independent inputs/outputs (nY0 and nY1) and a

common input/output (nZ). A digital enable input (E) is common to all switches. When E is

HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of

current limiting resistors to interface inputs to voltages in excess of VCC.

2.

Features and benefits

 Wide analog input voltage range from

5 V to +5 V

 Complies with JEDEC standard no. 7A

 Low ON resistance:

 80

 (typical) at V

CC  VEE =4.5 V

 70

 (typical) at V

CC  VEE =6.0 V

 60

 (typical) at V

CC  VEE =9.0 V

 Logic level translation: to enable 5 V logic to communicate with

5 V analog signals

 Typical ‘break before make’ built-in

 ESD protection:

 HBM JESD22-A114F exceeds 2000 V

 MM JESD22-A115-A exceeds 200 V

 CDM JESD22-C101E exceeds 1000 V

 Multiple package options

 Specified from

40 Cto +85 C and 40 Cto +125 C

3.

Applications

 Analog multiplexing and demultiplexing

 Digital multiplexing and demultiplexing

 Signal gating

74HC4053; 74HCT4053

Triple 2-channel analog multiplexer/demultiplexer

Rev. 9 — 10 February 2016

Product data sheet