910GL datasheet(55/426 Pages) INTEL

55 / 426 page

Datasheet

3.2

Platform Configuration

In platforms that support DMI (e.g. this (G)MCH) the configuration structure is significantly

different from previous Hub architectures. The DMI physically connects the (G)MCH and the

Intel ICH6; so, from a configuration standpoint, the DMI is logically PCI bus 0. As a result, all

devices internal to the (G)MCH and the Intel ICH6 appear to be on PCI bus 0.

The ICH6 internal LAN controller does not appear on bus 0; it appears on the external PCI bus

(whose number is configurable).

The system’s primary PCI expansion bus is physically attached to the Intel ICH6 and, from a

configuration perspective, appears to be a hierarchical PCI bus behind a PCI-to-PCI bridge and

therefore has a programmable PCI Bus number. The PCI Express Graphics Attach appears to

system software to be a real PCI bus behind a PCI-to-PCI bridge that is a device resident on PCI

bus 0.

Note:

A physical PCI bus 0 does not exist and that DMI and the internal devices in the (G)MCH and

Intel ICH6 logically constitute PCI Bus 0 to configuration software. This is shown in Figure 3-1.

Figure 3-1. Conceptual Chipset PCI Configuration Diagram

Device 1 (82915G/82915P/

82915PL GMCH only

Internal Graphics Bus 0,

(82915G/82915GV/82915G

L82910GL Device

Intel ® 82915G/ 82915GV/ 82915GL/

82915P/82915PL/82919GL (G)MCH

Processor

PCI Configuration in I/O

DRAM Interface Bus 0,

Device 0

DMI

PCI_Config_Dia

910GL データシート(PDF) 55 Page - Intel Corporation