L9301 datasheet(37/51 Pages) STMICROELECTRONICS

部品番号	L9301

部品情報	Automotive octal low side driver or quad low side plus quad high side driver

PDF	51 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

37 / 51 page

DocID028688 Rev 6

37/51

L9301

SPI

13.2

MISO

Back supply current into supply pin of MISO is not allowed.

Back to Back structure: in case of an over-voltage condition at the MISO output, the HS path

(Back to Back) has to be switched off after tOFF_PROT by analog circuitry to avoid back

supply current into supply pin of SDO.

Protection of SDO Output

The internal LS driver must withstand a direct short circuit to battery (current limitation or

shutdown possible, no destruction allowed).

The internal HS driver must withstand a direct short circuit to GND (current limitation or

shutdown possible, no destruction allowed).

Table 26. MISO

Symbol

Parameter

Test condition

Min.

Typ.

Max.

Unit

MISO

V_OH

Logic output high

voltage

Isink = 2 mA

VDD_I/O-0.4

V_OL

Logic output low voltage Isource = 2 mA

0.4

VOV_MISO

Over voltage detection

threshold at MISO

output

VDDIO+0.05

VDDIO+0.2

tOFF_PROT

Turn OFF delay for over

voltage reverse supply

protection

1.5

μs

L9301 データシート(PDF) 37 Page - STMicroelectronics

L9301 データシート(HTML) 37 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

データシートダウンロード