ADC3541 datasheet(28/68 Pages) TI1

28 / 68 page

7.3.4.2 Numerically Controlled Oscillator (NCO) and Digital Mixer

The decimation block is equipped with a 32-bit NCO and a digital mixer to fine tune the frequency placement

prior to the digital filtering. The oscillator generates a complex exponential sequence of:

ejωn (default) or e–jωn

(1)

where: frequency (ω) is specified as a signed number by the 32-bit register setting

The complex exponential sequence is multiplied with the real input from the ADC to mix the desired carrier to a

frequency equal to fIN + fNCO. The NCO frequency can be tuned from –FS/2 to +FS/2 and is processed as a

signed, 2s complement number. After programming a new NCO frequency, the MIXER RESTART register bit or

SYNC pin has to be toggled for the new frequency to get active. Additionally the ADC354x provides the option

via SPI to invert the mixer phase.

The NCO frequency setting is set by the 32-bit register value given and calculated as:

NCO = fNCO × 232 / FS

(2)

where:

• NCO = NCO register setting (decimal value)

• fNCO = Desired NCO frequency (MHz)

• FS = ADC sampling rate (MSPS)

The NCO programming is further illustrated with this example:

• ADC sampling rate FS = 65 MSPS

• Input signal fIN = 10 MHz

• Desired output frequency fOUT = 0 MHz

For this example there are actually four ways to program the NCO and achieve the desired output frequency as

shown in Table 7-2.

Table 7-2. NCO value calculations example

Alias or negative image

fNCO

Mixer Phase

Frequency translation for fOUT

fIN = –10 MHz

fNCO = 10 MHz

as is

fOUT = fIN + fNCO = –10 MHz +10 MHz = 0 MHz

fIN = 10 MHz

fNCO = –10 MHz

fOUT = fIN + fNCO = 10 MHz + (–10 MHz) = 0 MHz

fIN = 10 MHz

fNCO = 10 MHz

inverted

fOUT = fIN – fNCO = 10 MHz – 10 MHz = 0 MHz

fIN = –10 MHz

fNCO = –10 MHz

fOUT = fIN – fNCO = –10 MHz – (–10 MHz) = 0 MHz

ADC3541

SBAS840 – JULY 2020

www.ti.com

Submit Document Feedback

Product Folder Links: ADC3541

ADC3541 データシート(PDF) 28 Page - Texas Instruments

ADC3541 データシート(HTML) 28 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

データシートダウンロード