L99DZ100GP datasheet(22/197 Pages) STMICROELECTRONICS

22 / 197 page

Electrical specifications

L99DZ100G, L99DZ100GP

22/197

DS11546 Rev 5

Note:

All maximum ratings are absolute ratings. Leaving the limitation of any of these values may

cause an irreversible damage of the integrated circuit!

Note:

Loss of ground or ground shift with externally grounded loads: ESD structures are

configured for nominal currents only. If external loads are connected to different grounds,

the current load must be limited to this nominal current.

3.2

ESD protection

IPGNDcum

Maximum cumulated current at PGND drawn

by OUT2 & OUT5(2)

±12.5

IPGNDcum

Maximum cumulated current at PGND drawn

by OUT3, OUT4 & ECV(2)

±12.5

ISGND

Maximum current at SGND(2)

±1.25

GND pins

PGND versus SGND

-0.3 to 0.3

1. 5V_2 is robust against SC to 28 V only in case VSREG is supplied.

2. Values for the absolute maximum DC current through the bond wires. This value does not consider

maximum power dissipation or other limits.

3. Guaranteed by design.

Table 3. Absolute maximum ratings (continued)

Symbol

Parameter / test condition

Value [DC voltage]

Unit

Table 4. ESD protection

Parameter

Value

Unit

All pins(1)

1. HBM (human body model, 100 pF, 1.5 kΩ) according to MIL 883C, Method 3015.7 or EIA/JESD22A114-A.

+/-2

All power output pins (2): OUT1 – OUT15, OUT_HS, ECV

+/-4

LIN

+/-8(2)

+/-9(3) (4)

+/-6(5)

2. HBM with all none zapped pins grounded.

3. Indirect ESD Test according to IEC 61000-4-2 (150 pF, 330 Ω) and ‘Hardware Requirements for LIN, CAN

and Flexray Interfaces in Automotive Applications’ (version 1.3, 2012-05-04).

4. Value has been verified by an external test house; the result was equal or better than minimum

requirement.

5. Direct ESD Test according to IEC 61000-4-2 (150 pF, 330 Ω) and ‘Hardware Requirements for LIN, CAN

and Flexray Interfaces in Automotive Applications’ (version 1.3, 2012-05-04).

CAN_H, CAN_L

+/-8(2)

+/-6(5) (4)

All pins(6)

6. Charged device model.

+/-500

Corner pins(6)

+/-750

All pins(7)

7. Machine model; C = 220 pF, R = 0 Ω.

+/- 200

L99DZ100GP データシート(PDF) 22 Page - STMicroelectronics

L99DZ100GP データシート(HTML) 22 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシートダウンロード