LM2507GR datasheet(10/22 Pages) NSC

部品番号	LM2507GR

部品情報	Low Power Mobile Pixel Link (MPL) Level 0, 16-bit CPU Display interface Serializer and Deserializer

PDF	22 Pages

Scroll/Zoom	100%

メーカー	NSC [National Semiconductor (TI)]

ホームページ	http://www.national.com

Logo

10 / 22 page

Functional Description (Continued)

To account for the latency through the MPL link, a dual

READ operation is required by the host. The first read re-

turns invalid data (all Low), which the host ignores. Once

data has returned to the Master, the INTR signal is asserted

to inform the host to initiate a second read operation. During

this second read operation the MD line is held in the idle bus

phase and valid data is returned through the Master device.

After the CS* Low-to-High transition the INTR is de-

asserted. The use of the INTR pin is optional. The host may

simply wait long enough and then issue the 2nd Read to the

Master. In this case the INTR MST output should be leaft as

a NC (no connect). READ data will be returned by 36 or 46

MC cycles (depending upon IDR setting). The host just need

to wait till after the data is ready and then access it (i.e. 50 or

more MC cycles).

20186009

FIGURE 10. READ_Data and TA”

LM2507GR データシート(PDF) 10 Page - National Semiconductor (TI)