DP80390 datasheet(76/84 Pages) DCD

部品番号	DP80390

部品情報	Pipelined High Performance Microcontroller Instructions set details ver 3.10

PDF	84 Pages

Scroll/Zoom	100%

メーカー	DCD [Digital Core Design]

ホームページ	http://www.digitalcoredesign.com

Logo

76 / 84 page

DP80390 Instructions set details

- 76 -

All trademarks mentioned in this document

http://www.DigitalCoreDesign.com

are trademarks of their respective owners.

http://www.dcd.pl

3.39.

SJMP

Instruction:

SJMP rel

Function:

Short jump

Description:

Program control branches unconditionally to the address indicated. The

branch destination is computed by adding the signed displacement in

the second instruction byte to the PC, after incrementing the PC twice.

Therefore, the range of destinations allowed is from 128 bytes

preceding this instruction to 127 bytes following it.

Note:

Under the above conditions the instruction following SJMP will be at

102 H. Therefore, the displacement byte of the instruction will be the

relative offset (0123 H - 0102 H ) = 21 H . In other words, an SJMP with

a displacement of 0FE H would be a one-instruction infinite loop.

Operation:

(PC)

← (PC) + 2

(PC)

← (PC) + rel

Bytes:

Cycles:

Encoding:

relative address

DP80390 データシート(PDF) 76 Page - Digital Core Design