ST7713 datasheet(38/159 Pages) SITRONIX

部品番号	ST7713

部品情報	262K Color Single-Chip TFT Controller/Driver

PDF	159 Pages

Scroll/Zoom	100%

メーカー	SITRONIX [Sitronix Technology Co., Ltd.]

ホームページ	http://www.sitronix.com.tw

Logo

38 / 159 page

ST7713

Ver 1.6

2008-05

9.6 Data transfer pause

It will be possible when transferring a command, frame memory data or multiple parameter data to invoke a pause in the

data transmission. If the chip select line is released after a whole byte of a frame memory data or multiple parameter data

has been completed, then driver will wait and continue the frame memory data or parameter data transmission from the

point where it was paused. If the chip select Line is released after a whole byte of a command has been completed, then

the display module will receive either the command‘s parameters (if appropriate) or a new command when the chip select

line is next enabled as shown below.

This applies to the following 4 conditions:

1) Command-Pause-Command

2) Command-Pause-Parameter

3) Parameter-Pause-Command

4) Parameter-Pause-Parameter

9.6.1 Serial interface pause

Fig. 9.6.1 Serial interface pause protocol (pause by CSX)

9.6.2 Parallel interface pause

Fig. 9.6.2 Parallel bus pause protocol (paused by CSX)

ST7713 データシート(PDF) 38 Page - Sitronix Technology Co., Ltd.