ST7713 datasheet(39/159 Pages) SITRONIX

部品番号	ST7713

部品情報	262K Color Single-Chip TFT Controller/Driver

PDF	159 Pages

Scroll/Zoom	100%

メーカー	SITRONIX [Sitronix Technology Co., Ltd.]

ホームページ	http://www.sitronix.com.tw

Logo

39 / 159 page

ST7713

Ver 1.6

2008-05

9.7 Data Transfer Modes

The module has three kinds color modes for transferring data to the display RAM. These are 12-bits color per pixel, 16-bits

color per pixel and 18-bits color per pixel. The data format is described for each interface. Data can be downloaded to the

frame memory by 2 methods.

9.7.1 Method 1

The Image data is sent to the frame memory in successive frame writes, each time the frame memory is filled, the frame

memory pointer is reset to the start point and the next frame is written.

9.7.2 Method 2

Image data is sent and at the end of each frame memory download, a command is sent to stop frame memory write. Then

start memory write command is sent, and a new frame is downloaded.

Note:

1) These apply to all data transfer Color modes on both serial and parallel interfaces.

2) The frame memory can contain both odd and even number of pixels for both methods. Only complete pixel data will be

stored in the frame memory.

ST7713 データシート(PDF) 39 Page - Sitronix Technology Co., Ltd.