| データシートサーチシステム |
|
MMPF0100NPEP データシート(PDF) 97 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MMPF0100NPEP データシート(HTML) 97 Page - Freescale Semiconductor, Inc |
|
97 / 137 page ![]() Analog Integrated Circuit Device Data Freescale Semiconductor 97 PF0100 Functional Block Requirements and Behaviors Power Generation VGEN5 ACTIVE MODE – DC (CONTINUED) Turn-On Time Enable to 90% of end value, VIN3 = VIN3MIN, 4.5 V IGEN5 = 0.0 mA GEN5tON 60 – 500 s Turn-Off Time Disable to 10% of initial value, VIN3 = VIN3MIN IGEN5 = 0.0 mA GEN5tOFF –– 10 ms Start-Up Overshoot VIN3 = VIN3MIN, 4.5 V, IGEN5 = 0.0 mA GEN5OSHT –1.0 2.0 % Transient Load Response VIN3 = VIN3MIN, 4.5 V IGEN5 = 10 to 100 mA in 1.0 s Peak of overshoot or undershoot of VGEN5 with respect to final value. Refer to Figure 25 VGEN5LOTR –– 3.0 % Transient Line Response IGEN5 = 75 mA VIN3INITIAL = 2.8 V to VIN3FINAL = 3.3 V for VGEN5[3:0] = 0000 to 0111 VIN3INITIAL = VGEN5+0.3 V to VIN3FINAL = VGEN5+0.8 V for VGEN5[3:0] = 1000 to 1111 Refer to Figure 25 VGEN5LITR -5.0 8.0 mV Notes 64. When the LDO Output voltage is set above 2.6 V the minimum allowed input voltage need to be at least the output voltage plus 0.25 V for proper regulation due to the dropout voltage generated through the internal LDO transistor. 65. The PSRR of the regulators is measured with the perturbing signal at the input of the regulator. The power management IC is supplied separately from the input of the regulator and does not contain the perturbed signal. During measurements, care must be taken not to operate in the dropout region of the regulator under test. VIN3MIN refers to the minimum allowed input voltage for a particular output voltage. Table 104. VGEN5 Electrical Characteristics All parameters are specified at TA = -40 to 85 °C, VIN = 3.6 V, VIN3 = 3.6 V, VGEN5[3:0] = 1111, IGEN5 = 10 mA, typical external component values, unless otherwise noted. Typical values are characterized at VIN = 3.6 V, VIN3 = 3.6 V, VGEN5[3:0] = 1111, IGEN5 = 10 mA, and 25 °C, unless otherwise noted. Parameter Symbol Min Typ Max Unit |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |