| データシートサーチシステム |
|
SLAS191A データシート(PDF) 32 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
SLAS191A データシート(HTML) 32 Page - Texas Instruments |
|
32 / 86 page ![]() 1–26 VPP -Input Apply If programming via serial port VPP fuse F250 mA Connects to programming adapter MSP-PRG430x (EVK only) Jumper for programming the EPROM of an EVK with the Monitor Figure 1–22. Programming Voltage and Jumper Location To load a program into the MSP430 EPROM/ROM using the HyperTerminal, the following points must be considered: • The Monitor code must already be programmed into the EPROM/ROM (only the EVK is supplied with the code for the monitor program mon_x.txt). • The STK/EVK 9-pin D-SUB-connector must be connected to the serial interface (the default is COM2) of the PC. • The supply voltages of the STK/EVK must be applied by connecting the STK/EVK to the serial interface of the PC and by connecting the programming supply voltage. NOTE: Programming the EVK using the Serial Port Attach a jumper between PIN 13 and PIN 14 on the Programming Adapter connector (see Hardware Installation in Chapter 9). If the assembled file gs_stk5.asm is downloaded, the program routines for the LCD, and the interrupt routine of the previous example will be written into the EPROM/ROM (see sections in the code). |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |