| データシートサーチシステム |
|
STCOM10 データシート(PDF) 48 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STCOM10 データシート(HTML) 48 Page - STMicroelectronics |
|
48 / 58 page ![]() Electrical characteristics STCOM 48/58 DocID028515 Rev 1 Table 17. Supply characteristics - QFS Symbol Parameter Conditions Min. Typ. Max. Unit I(DVDD_1V2_QFS) QFS power consumption from 1.2 V power supply Master clock = 24 MHz see(1) 5.1 mA I(DVDD_3V3_QFS) QFS power consumption from 3.3 V power supply Master clock = 24 MHz see(1) 1.1 mA 1. The test is performed with the following enabled digital blocks: 2 x GPT, 2 x SPI, 2 x USART, IPC, DMA, 2 x I2C, AES, TRNG. The value is calculated by measuring the difference in the supply current with and without QFS enabled and running. Table 18. 24 MHz oscillator Symbol Parameter Conditions Min. Typ. Max. Unit f(MCLK) Crystal oscillator frequency 24 MHz C0 External quartz crystal Shunt capacitance 3.5 pF ESR External quartz crystal ESR value See(1) 60 CL MCLK_IN , MCLK_OUT load capacitance See(1) 10 15 pF 1. Guaranteed by design, not tested in production. Table 19. 32 kHz oscillator Symbol Parameter Conditions Min. Typ. Max. Unit f(OSC32) Crystal oscillator frequency 32.768 kHz C0 External quartz crystal Shunt capacitance 0.9 pF ESR External quartz crystal ESR value See(1) 60 k CL External quartz crystal load capacitance See(1) 12.5 pF 1. Guaranteed by design, not tested in production. Table 20. Digital supply characteristics - I/O Symbol Parameter Conditions Min. Typ. Max. Unit I(DVDD_3V3_IO) 3.3 V I/O digital supply current 8 GPIO toggling at 0.5 MHz with Cext ~= 50 pF see(1) 23.0 mA I(DVDD_3V3_IO) 3.3 V I/O digital supply current 8 GPIO toggling at 1 MHz with Cext ~= 50 pF see(1) 24.9 mA I(DVDD_3V3_IO) 3.3 V I/O digital supply current 8 GPIO toggling at 8 MHz with Cext ~= 50 pF see(1) 49.4 mA 1. The tests are performed with the following enabled digital blocks: 2 x GPT, 2 x SPI, 2 x USART, IPC, DMA, 2 x I2C, AES, TRNG, QFS. Cortex™ frequency equals to 96 MHz and Cortex™ fetching by RAM. The values are calculated by measuring the difference in the supply current with and without 8 GPIOs enabled and toggling at the given frequency. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |