 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
F39-TGR-CVL-B-2-R データシート(PDF) 43 Page - Omron Electronics LLC |
|
|
|||||||||||||||||||||||||||||
F39-TGR-CVL-B-2-R データシート(HTML) 43 Page - Omron Electronics LLC |
|
|
43 / 98 page  25 SECTION 9 Safe Mounting Distances !WARNING Never install an MS4800 system without regard to the safety distance. If the MS4800 system is mounted too close to the point of operation hazard, the machine may not stop in time to prevent an operator injury. An MS4800 system must be mounted far enough from the machine danger zone so the machine will stop before a hand or other body part reaches the hazardous area. This distance is called the safety distance. It is a calculated number based on a formula. The safety distance "S" is the minimum safe distance between the safety light curtain and the point of operation (pinch point). Calculation of the safety distance "S" is based on the European standard EN999 and applies to safety light curtains that are used in industrial environ- ments. 9-1 Safety distance for safeguarding danger points !WARNING Additional countermeasures may be necessary to prevent access to the dan- gerous area from above, below, the sides or the rear of the machine. S S Additional countermeasures Direction of approach |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
