| データシートサーチシステム |
|
L9945 データシート(PDF) 60 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L9945 データシート(HTML) 60 Page - STMicroelectronics |
|
60 / 151 page ![]() [21] OC_READ_05: Selection of the OC threshold to read. Fixed threshold or actual threshold. 0: Read fixed OC threshold 1: Read actual OC threshold [20:15] OC_CONFIG_05: Selection of over current detection threshold. 6 bit to code for the OC detection threshold See Table 40 [14:13] OC_TEMP_COMP_05: Over current detection with temperature compensation (see note of Table 30. SPI MOSI list) 00: No OC compensation 01: ΔT < 60 °C 10: ΔT < 40 °C 11: ΔT < 25 °C [12] OC_BATT_COMP_05: Over current detection with battery compensation 0: Battery compensation de-activated 1: Battery compensation activated [11:9] TBLANK_OC_05: When DSM is selected, it specifies the OC blanking time to allow VDS settling. When Rshunt is selected, it only determines the assertion of the 'No OC failure' diagnostic code (once expired). 000: 11.1 µs 001: 15.6 µs 010: 20 µs 011: 31.1 µs 100: 42.2 µs 101: 53.3 µs 110: 97.8 µs 111: 142.2 µs [8] PROT_CONFIG_05: Output re-engagement strategy. Specifies how channel reactivation must be performed following an OC event. This bit has no effect for H-Bridge configuration. Behavior in case of HB is always as PROT_CONFIG_05 = '1'. Diagnostics latches have to be cleared in case of OC in order to re-activate the bridge. 0: output re-engagement with control signal switching event 1: output re-engagement after diagnostic readout and control signal switching event [7] OC_DS_SHUNT_05: Configures the output measure OC with shunt or by DSM 0: OC with DSM 1: OC with Shunt [6] DIAG_I_CONFIG_05: CH5 OL regulator output current capability 0: 100 µA capability 1: 1 mA capability [5:4] GCC_CONFIG_05: Selection of gate charge/discharge currents 00: Lim by ext resistor 01: 20 mA 10: 5 mA 11: 1 mA [3] N_P_CONFIG_05: NMOS or PMOS option for HS configuration 0: Output configured for NMOS 1: Output configured for PMOS [2] LS_HS_CONFIG_05: Configures the channel as LS or HS 0: LS configuration 1: HS configuration L9945 SPI MOSI/MISO list DS12275 - Rev 8 page 60/151 |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |