L9945 datasheet(66/151 Pages) STMICROELECTRONICS

66 / 151 page

COMMAND 8

Frame partitioning

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10

OC_CONFIG_08

Description:

OUT8 configuration, P&H2 configuration, H-Bridge 2 enable

[31:28] C: Command 8

1000

[27] R/W: Bit to read/write configuration

0: Write & request read

1: Request read only

[26] HB2_CONFIG: Configures CH5-CH6-CH7-CH8 for H-bridge2 operation

0: Not H-bridge configured

1: CH5-CH8 configured as H-bridge

[25] PH2_DIAG_STRATEGY: OL masking strategy to prevent false OL assertion in P&H2 configuration

0: "No OL/STG /STB" failure reported

1: "No diagnostic done" reported

[24] PH2_CONFIG: Configures CH2-CH3 for Peak and Hold2 operation

0: Peak and Hold2 not configured

1: Peak and Hold2 configured

[23:22] TDIAG_CONFIG_08: OFF state diagnostic blanking/filter timer for output 08. It has no effect if HB2_config =1 &

HB2_tdiag_ext_config = 0.

00: 25.6 µs

01: 61.2 µs

10: 105.6 µs

11: 150 µs

[21] OC_READ_08: Selection of the OC threshold to read. Fixed threshold or actual threshold.

0: Read fixed OC threshold

1: Read actual OC threshold

[20:15] OC_CONFIG_08: Selection of over current detection threshold. 6 bit to code for the OC detection threshold

See Table 40

[14:13] OC_TEMP_COMP_08: Over current detection with temperature compensation (see note of Table 30. SPI MOSI list)

00: No OC compensation

01: ΔT < 60 °C

10: ΔT < 40 °C

11: ΔT < 25 °C

L9945

SPI MOSI/MISO list

DS12275 - Rev 8

page 66/151

L9945 データシート(PDF) 66 Page - STMicroelectronics

L9945 データシート(HTML) 66 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシートダウンロード