LSM6DSO32 datasheet(46/153 Pages) STMICROELECTRONICS

部品番号	LSM6DSO32

部品情報	iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope

PDF	153 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

46 / 153 page

Functionality

LSM6DSO32

46/153

DocID032891 Rev 1

6.3

Gyroscope power modes

In the LSM6DSO32, the gyroscope can be configured in four different operating modes:

power-down, low-power, normal mode and high-performance mode. The operating mode

selected depends on the value of the G_HM_MODE bit in CTRL7_G (16h). If G_HM_MODE

is set to '0', high-performance mode is valid for all ODRs (from 12.5 Hz up to 6.66 kHz).

To enable the low-power and normal mode, the G_HM_MODE bit has to be set to '1'. Low-

power mode is available for lower ODRs (12.5, 26, 52 Hz) while normal mode is available

for ODRs equal to 104 and 208 Hz.

6.4

Block diagram of filters

Figure 15. Block diagram of filters

6.4.1

Block diagrams of the accelerometer filters

In the LSM6DSO32, the filtering chain for the accelerometer part is composed of the

following:



Analog filter (anti-aliasing)



Digital filter (LPF1)



Composite filter

Details of the block diagram appear in the following figure.

Figure 16. Accelerometer chain

LSM6DSO32 データシート(PDF) 46 Page - STMicroelectronics