AD9397SLASHPCB datasheet(22/28 Pages) AD

22 / 28 page

AD9397

Rev. 0 | Page 22 of 28

0x35—Bits[4:0] ColorSpaceConversionCoefficientA1MSBs

These 5 bits form the 5 MSBs of the Color Space Conversion

Coefficient A1. This combined with the 8 LSBs of the following

user programmable. The equation takes the form of:

ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4

GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4

BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4

The default value for the 13-bit A1 coefficient is 0x0C52.

0x36—Bits[7:0] ColorSpaceConversionCoefficientA1LSBs

See the Register 0x35 section.

0x37—Bits[4:0] CSC A2 MSBs

These five bits form the 5 MSBs of the Color Space Conversion

Coefficient A2. Combined with the 8 LSBs of the following

user programmable. The equation takes the form of:

ROUT = (A1 × RIN) + (A2 × GIN) + (A3 × BIN) + A4

GOUT = (B1 × RIN) + (B2 × GIN) + (B3 × BIN) + B4

BOUT = (C1 × RIN) + (C2 × GIN) + (C3 × BIN) + C4

The default value for the 13-bit A2 coefficient is 0x0800.

0x38—Bits[7:0] CSC A2 LSBs

See the Register 0x37 section.

0x39—Bits[4:0] CSC A3 MSBs

The default value for the 13-bit A3 is 0x0000.

0x3A—Bits[7:0] CSC A3 LSBs

0x3B—Bits[4:0] CSC A4 MSBs

The default value for the 13-bit A4 is 0x19D7.

0x3C—Bits[7:0] CSC A4 LSBs

0x3D—Bits[4:0] CSC B1 MSBs

The default value for the 13-bit B1 is 0x1C54.

0x3E—Bits[7:0] CSC B1 LSBs

0x3F—Bits[4:0] CSC B2 MSBs

The default value for the 13-bit B2 is 0x0800.

0x40—Bits[7:0] CSC B2 LSBs

0x41—Bits[4:0] CSC B3 MSBs

The default value for the 13-bit B3 is 0x1E89.

0x42—Bit[7:0] CSC B3 LSBs

0x43—Bit[4:0] CSC B4 MSBs

The default value for the 13-bit B4 is 0x0291.

0x44—Bits[7:0] CSC B4 LSBs

0x45—Bits[4:0] CSC C1 MSBs

The default value for the 13-bit C1 is 0x0000.

0x46—Bits[7:0] CSC C1 LSBs

0x47—Bits[4:0] CSC C2 MSBs

The default value for the 13-bit C2 is 0x0800.

0x48—Bits[7:0] CSC C2 LSBs

0x49—Bits[4:0] CSC C3 MSBs

The default value for the 13-bit C3 is 0x0E87.

0x4A—Bits[7:0] CSC C3 LSBs

0x4B—Bits[4:0] CSC C4 MSBs

The default value for the 13-bit C4 is 0x18BD.

0x4C—Bits[7:0] CSC C4 LSBs

0x59—Bit[6] MDA/MCL PU Disable

This bit disables the inter-MDA/MCL pull-ups.

0x59—Bit[5] CLK Term O/R

This bit allows for overriding during power down.

0 = auto, 1 = manual.

0x59—Bit[4] Manual CLK Term

This bit allows normal clock termination or disconnects this. 0

= normal, 1 = disconnected.

0x59—Bit[0] MDA/MCL Three-State

This bit three-states the MDA/MCL lines to allow in-circuit

programming of the EEPROM.

AD9397/PCB データシート(PDF) 22 Page - Analog Devices

AD9397/PCB データシート(HTML) 22 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

データシートダウンロード