 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
AS1181 データシート(PDF) 32 Page - ams-OSRAM AG |
|
|
|||||||||||||||||||||||||||||
AS1181 データシート(HTML) 32 Page - ams-OSRAM AG |
|
|
32 / 92 page  AS1181 Functional description Datasheet • PUBLIC • Document Feedback DS001139 • v3-00 • 2026-Apr-01 32 / 92 / 7.2.3 Digital safety monitors 7.2.3.1 Illumination time monitor The illumination time monitor is continuously sampling the PWM ON time applied via both inputs and comparing the result with the value programmed in “TD_ILLUM_MAX register (Address 0x1A36)”. In PWM mode the ON time (HIGH Time) is constrained to be maximum 15ms. Therefore, the value in the TD_ILLUM_MAX register shall be less the 15ms in this mode. (Refer to Table 5: External PWM mode constraints). If the actual PWM ON time is longer than the value programmed the current sinks get turned off and the respective interrupt flag is set. Figure 31 shows the actual implementation – in the 3rd frame (STROBE = yellow) the PWM ON time changes from 4ms to 10ms – TD_ILLUM_MAX is programmed to 4.1ms. The current sink (blue) is turned off immediately and the interrupt IRQ_N (green) is pulled to GND. The interrupt “Illumination Duration” has been set and is informing the Host. Figure 31: Illumination time monitor example |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
