E2000 datasheet(74/104 Pages) INTEL

74 / 104 page

Thermal Specifications and Design Considerations

Datasheet

The case temperature is defined at the geometric top center of the processor. Analysis

indicates that real applications are unlikely to cause the processor to consume

maximum power dissipation for sustained time periods. Intel recommends that

complete thermal solution designs target the Thermal Design Power (TDP) indicated in

Table 26 instead of the maximum processor power consumption. The Thermal Monitor

feature is designed to protect the processor in the unlikely event that an application

exceeds the TDP recommendation for a sustained periods of time. For more details on

the usage of this feature, refer to Section 5.2. To ensure maximum flexibility for future

requirements, systems should be designed to the 775_VR_CONFIG_06 guidelines, even

if a processor with a lower thermal dissipation is currently planned. In all cases the

Thermal Monitor and Thermal Monitor 2 feature must be enabled for the

processor to remain within specification.

Table 26.

Processor Thermal Specifications

Processor

Number

Core

Frequency

(GHz)

Thermal

Design

Power (W)1,2

NOTES:

1. Thermal Design Power (TDP) should be used for processor thermal solution design targets. The TDP is not the maximum power

that the processor can dissipate.

2. This table shows the maximum TDP for a given frequency range. Individual processors may have a lower TDP. Therefore, the

maximum TC will vary depending on the TDP of the individual processor. Refer to thermal profile figure and associated table for

the allowed combinations of power and TC.

Extended

HALT

Power (w)3

3. Specification is at 35 °C TC and typical voltage loadline. Specification is ensured by design characterization and not 100% tested.

775_VR_

CONFIG_06

Guidance4

4. 775_VR_CONFIG_06 guidelines provide a design target for meeting future thermal requirements.

Minimum

TC (°C)

Maximum TC

(°C)

Notes

E2220

2.4

65.0

775_VR_

CONFIG_06

Guidance

Table 28,

Figure 16

5. These processors have CPUID = 06FDh.

E2200

2.2

65.0

E2180

2.0

65.0

E2160

1.8

65.0

E2140

1.6

65.0

E2160

1.8

65.0

775_VR_

CONFIG_06

Guidance

Table 27,

Figure 15

6. These processors have CPUID = 06F2h.

E2140

1.6

65.0

E2000 データシート(PDF) 74 Page - Intel Corporation

E2000 データシート(HTML) 74 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシートダウンロード

リンク URL

E2000 データシート(PDF) 74 Page - Intel Corporation

E2000 データシート(HTML) 74 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシート ダウンロード

リンク URL

データシートダウンロード