E2000 datasheet(10/104 Pages) INTEL

10 / 104 page

Introduction

Datasheet

1.1.1

Processor Terminology

Commonly used terms are explained here for clarification:

• Intel® Pentium® Dual-Core Desktop processor E2000 series — Dual core

processor in the FC-LGA6 package with a 1 MB L2 cache.

• Processor — For this document, the term processor is the generic form of the

Intel® Pentium® Dual-Core Desktop processor E2000 series. The processor is a

single package that contains one or more execution units.

• Keep-out zone — The area on or near the processor that system design can not

use.

• Processor core — Processor core die with integrated L2 cache.

• LGA775 socket — The processors mate with the system board through a surface

mount, 775-land, LGA socket.

• Integrated heat spreader (IHS) —A component of the processor package used

to enhance the thermal performance of the package. Component thermal solutions

interface with the processor at the IHS surface.

• Retention mechanism (RM) — Since the LGA775 socket does not include any

mechanical features for heatsink attach, a retention mechanism is required.

Component thermal solutions should attach to the processor via a retention

mechanism that is independent of the socket.

• FSB (Front Side Bus) — The electrical interface that connects the processor to

the chipset. Also referred to as the processor system bus or the system bus. All

memory and I/O transactions as well as interrupt messages pass between the

processor and chipset over the FSB.

• Storage conditions — Refers to a non-operational state. The processor may be

installed in a platform, in a tray, or loose. Processors may be sealed in packaging or

exposed to free air. Under these conditions, processor lands should not be

connected to any supply voltages, have any I/Os biased, or receive any clocks.

Upon exposure to “free air”(i.e., unsealed packaging or a device removed from

packaging material) the processor must be handled in accordance with moisture

sensitivity labeling (MSL) as indicated on the packaging material.

• Functional operation — Refers to normal operating conditions in which all

processor specifications, including DC, AC, system bus, signal quality, mechanical

and thermal are satisfied.

• Execute Disable Bit — The Execute Disable bit allows memory to be marked as

executable or non-executable, when combined with a supporting operating system.

If code attempts to run in non-executable memory the processor raises an error to

the operating system. This feature can prevent some classes of viruses or worms

that exploit buffer over run vulnerabilities and can thus help improve the overall

security of the system. See the Intel® Architecture Software Developer's Manual

for more detailed information.

• Intel® 64 Architecture — An enhancement to Intel's IA-32 architecture, allowing

the processor to execute operating systems and applications written to take

advantage of the Intel 64 architecture. Further details on Intel 64 architecture and

programming model can be found in the Intel Extended Memory 64 Technology

Software Developer Guide at http://developer.intel.com/technology/

64bitextensions/.

• Enhanced Intel SpeedStep® Technology — Enhanced Intel SpeedStep

technology allows trade-offs to be made between performance and power

consumptions, based on processor utilization. This may lower average power

consumption (in conjunction with OS support).

E2000 データシート(PDF) 10 Page - Intel Corporation

E2000 データシート(HTML) 10 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシートダウンロード