WM8753LEBSLASHV datasheet(18/87 Pages) WOLFSON

18 / 87 page

Advanced Information

WM8753L

AI Rev 3.1 June 2004

DEVICE DESCRIPTION

INTRODUCTION

The WM8753L is a low power audio codec combining a high quality stereo audio DAC with a high

quality stereo ADC and mono DAC. The stereo ADC may be configured for operation as a mono or

stereo voice ADC to operate with the mono DAC as a voice codec. Alternatively the ADC may be

configured as a hi-fi ADC for high quality record function. In voice mode the ADC filters are optimised

for voice record function. Applications for such a combined device include MP3 playing ‘smart-

phones’ and Bluetooth connected high quality stereo headsets. The mono voice codec might be used

either for the usual voice codec function, or perhaps as an additional codec for support of Bluetooth

links from such MP3 phones. Alternatively, if not required for such functions, the ADC of the codec

may be reconfigured so it is clocked off the I

2S audio data interface domain, and its output sent over

the Hi-Fi audio interface as well as the voice audio interface, so it might be used as a recording ADC

in an I

2S based audio system.

FEATURES

The chip offers great flexibility in use, and so can support many different modes of operation as

follows:

LINE INPUTS

The device includes two pairs of stereo analogue inputs that can be switched internally. LINE1 and

LINE2 can be used as either a pair of mono line level inputs, or as a single stereo pair. They may also

be used as differential input or be mixed together. A further two inputs, RXP and RXN, can be used

as a single differential input or mixed together. The output from these inputs can be played back in

stereo form to the headphones, or mono form to the transmit mono output. The mono output supports

both single ended and differential output, using a pair of output pins. If not required, the differential

output buffer may be powered down.

MICROPHONE INPUTS

Two microphone preamplifiers are provided, allowing for a pair of external microphones to be

differentially connected, with user defined gain using internal resistors, offering gain range from

+12dB to +30dB. Alternatively, three microphones can be connected to one microphone preamplifier,

with the second preamplifier disabled, and the microphone required is then selected. A microphone

bias is output from the chip which can be used to bias all microphones. The signal routing can be

configured to allow manual adjustment of mic levels, or indeed to allow the ALC loop to control the

level of mic signal that is transmitted.

PGA AND ALC OPERATION

A programmable gain amplifier is provided in the input path to the ADC. This may be used manually

or in conjunction with a mixed analog/digital automatic level control (ALC) which keeps the recording

volume constant.

HI-FI DAC

The hi-fi DAC provides high quality audio playback suitable for all portable audio hi-fi type

applications, including MP3 players and portable disc players of all types.

VOICE CODEC

The on-chip stereo ADC and mono DAC are of a high quality using a multi-bit high-order

oversampling architecture to deliver optimum performance with low power consumption. Various

sample rates are supported, from the 8ks/s rate typically used in voice codecs, up to the 48ks/s rate

used in high quality audio applications. The ADC digital filters may be switched for voice mode to

filters with steeper roll-off.

WM8753LEB/V データシート(PDF) 18 Page - Wolfson Microelectronics plc

WM8753LEB/V データシート(HTML) 18 Page - Wolfson Microelectronics plc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87

データシートダウンロード