 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
DP35DP データシート(PDF) 51 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
DP35DP データシート(HTML) 51 Page - Intel Corporation |
|
|
51 / 84 page  Technical Reference 51 2.3 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 14 shows the location of the jumper block. The jumper determines the BIOS Setup program’s mode. Table 24 lists the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. Figure 14. Location of the Jumper Block Table 24. BIOS Setup Configuration Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 32 1 The BIOS uses current configuration information and passwords for booting. Configure 2-3 32 1 After the POST runs, Setup runs automatically. The maintenance menu is displayed. Recovery None 32 1 The BIOS attempts to recover the BIOS configuration. See Section 3.7 for more information on BIOS recovery. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
