| データシートサーチシステム |
|
TAS5731MPHPR データシート(PDF) 47 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TAS5731MPHPR データシート(HTML) 47 Page - Texas Instruments |
|
47 / 68 page ![]() TAS5731M www.ti.com SLOS838B – JULY 2013 – REVISED NOVEMBER 2013 ERROR STATUS REGISTER (0x02) The error bits are sticky and are not cleared by the hardware. This means that the software must clear the register (write zeroes) and then read them to determine if they are persistent errors. Error Definitions: • MCLK Error : MCLK frequency is changing. The number of MCLKs per LRCLK is changing. • SCLK Error: The number of SCLKs per LRCLK is changing. • LRCLK Error: LRCLK frequency is changing. • Frame Slip: LRCLK phase is drifting with respect to internal Frame Sync. Table 6. Error Status Register (0x02) D7 D6 D5 D4 D3 D2 D1 D0 FUNCTION 1 - – – – – – – MCLK error – 1 – – – – – – PLL autolock error – – 1 – – – – – SCLK error – – – 1 – – – – LRCLK error – – – – 1 – – – Frame slip – – – – – 1 – – Clip indicator – – – – – – 1 – Overcurrent, overtemperature, or undervoltage errors – – – – – – – 0 Reserved 0 0 0 0 0 0 0 – No errors (1) (1) Default values are in bold. SYSTEM CONTROL REGISTER 1 (0x03) The system control register 1 has several functions: Bit D7: If 0, the dc-blocking filter for each channel is disabled. If 1, the dc-blocking filter (–3 dB cutoff <1 Hz) for each channel is enabled (default). Bit D5: If 0, use soft unmute on recovery from clock error. This is a slow recovery. Unmute takes the same time as the volume ramp defined in register 0x0E. If 1, use hard unmute on recovery from clock error (default). This is a fast recovery, a single step volume ramp Bits D1–D0: Select de-emphasis Table 7. System Control Register 1 (0x03) D7 D6 D5 D4 D3 D2 D1 D0 FUNCTION 0 – – – – – – – PWM high-pass (dc blocking) disabled 1 – – – – – – – PWM high-pass (dc blocking) enabled (1) – 0 – – – – – – Reserved (1) – – 0 – – – – – Soft unmute on recovery from clock error – – 1 – – – – – Hard unmute on recovery from clock error (1) – – – 0 – – – – Reserved (1) – – – – 0 – – – Reserved (1) – – – – – 0 – – Reserved(1) – – – – – – 0 0 No de-emphasis (1) – – – – – – 0 1 De-emphasis for fS = 32 kHz – – – – – – 1 0 De-emphasis for fS = 44.1 kHz – – – – – – 1 1 De-emphasis for fS = 48 kHz (1) Default values are in bold. Copyright © 2013, Texas Instruments Incorporated 47 Product Folder Links :TAS5731M |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |