| データシートサーチシステム |
|
LAN9500AI データシート(PDF) 130 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN9500AI データシート(HTML) 130 Page - Microchip Technology |
|
130 / 213 page ![]() LAN950x DS00001875A-page 130 2010 - 2015 Microchip Technology Inc. Note 7-11 The default value for this bit is 0 when no EEPROM is present. If a EEPROM is present, the default value is the value of the LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or Lite Reset (LRST) will cause this bit to be restored to the image value last loaded from EEPROM, or to be set to 0 if no EEPROM is present. Note 7-12 (LAN9500/LAN9500i ONLY): nLNKA_LED (Ethernet link activity LED) (LAN9500A/LAN9500Ai ONLY): Determined by LED Select (LED_SEL) setting. Note 7-13 (LAN9500/LAN9500i ONLY): nFDX_LED (Ethernet full-duplex LED) (LAN9500A/LAN9500Ai ONLY): Determined by LED Select (LED_SEL) setting. Note 7-14 The default value depends on the state of the GPIO pin. 17:16 GPIO 8 Control (GPCTL8) The value of this field determines the function of the external GPIO8 pin as follows: 00 = GPIO8 01 = Note 7-13 10 = RXD2 11 = CRS Note: When enabled as RXD2 or CRS, the external device pin will reflect the state of the corresponding internal MII signal. This feature is useful as a diagnostic tool. R/W 00b 15:11 RESERVED RO - 10:8 GPIO Buffer Type (GPBUF[10:8]) When set, the output buffer for the corresponding GPIO signal is configured as a push/pull driver. When cleared, the corresponding GPIO signal is configured as an open-drain driver. Bits are assigned as follows: GPBUF8 – bit 8 GPBUF9 – bit 9 GPBUF10 – bit 10 R/W 000b 7 RESERVED RO - 6:4 GPIO Direction (GPDIR[10:8]) When set, enables the corresponding GPIO as an output. When cleared the GPIO is enabled as an input. Bits are assigned as follows: GPDIR8 – bit 4 GPDIR9 – bit 5 GPDIR10 – bit 6 R/W 000b 3 RESERVED RO - 2:0 GPIO Data (GPD[10:8]) When enabled as an output, the value written is reflected on GPIOn. When read, GPIOn reflects the current state of the corresponding GPIO pin. Bits are assigned as follows: GPD8 – bit 0 GPD9 – bit 1 GPD10 – bit 2 R/W Note 7-14 Bits Description Type Default |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |