| データシートサーチシステム |
|
LAN9500AI データシート(PDF) 189 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN9500AI データシート(HTML) 189 Page - Microchip Technology |
|
189 / 213 page ![]() 2010 - 2015 Microchip Technology Inc. DS00001875A-page 189 LAN950x 8.0 OPERATIONAL CHARACTERISTICS 8.1 Absolute Maximum Ratings* Supply Voltage (VDD33IO, VDD33A) (Note 8-1) ........................................................................................ 0V to +3.6V Positive voltage on signal pins, with respect to ground (Note 8-2) ......................................................................... +6V Negative voltage on signal pins, with respect to ground (Note 8-3)...................................................................... -0.5V Positive voltage on XI, with respect to ground ..................................................................................................... +4.6V Positive voltage on XO, with respect to ground ................................................................................................... +2.5V Ambient Operating Temperature in Still Air (TA).............................................................................................. Note 8-4 Storage Temperature ......................................................................................................................... .-55oC to +150oC Lead Temperature Range ........................................................................................ Refer to JEDEC Spec. J-STD-020 HBM ESD Performance .................................................................................................................................. .Note 8-5 IEC61000-4-2 Contact Discharge ESD Performance (Note 8-6) ....................................................................... .+/-8kV IEC61000-4-2 Air-Gap Discharge ESD Performance (Note 8-6) ..................................................................... .+/-15kV Note 8-1 When powering this device from laboratory or system power supplies, it is important that the absolute maximum ratings not be exceeded or device failure can result. Some power supplies exhibit voltage spikes on their outputs when AC power is switched on or off. In addition, voltage transients on the AC power line may appear on the DC output. If this possibility exists, it is suggested that a clamp circuit be used. Note 8-2 This rating does not apply to the following pins: XI, XO, EXRES, USBRBIAS. Note 8-3 This rating does not apply to the following pins: EXRES, USBRBIAS. Note 8-4 0oC to +70oC for commercial version, -40oC to +85oC for industrial version. Note 8-5 +/-8kV for LAN9500/LAN9500i, +/-5kV for LAN9500A/LAN9500Ai Note 8-6 Performed by independent 3rd party test facility. *Stresses exceeding those listed in this section could cause permanent damage to the device. This is a stress rating only. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Functional operation of the device at any condition exceeding those indicated in Section 8.2, "Operating Conditions**", Section 8.4, "DC Specifications", or any other applicable section of this specification is not implied. Note, device signals are NOT 5 volt tolerant unless specified otherwise. 8.2 Operating Conditions** Supply Voltage (VDD33A, VDD33BIAS, VDD33IO)............................................................................ +3.3V +/- 300mV Ambient Operating Temperature in Still Air (TA).............................................................................................. Note 8-4 **Proper operation of the device is guaranteed only within the ranges specified in this section. 8.3 Power Consumption This section details the power consumption of the device as measured during various modes of operation. Power con- sumption values are provided for both the device-only, and for the device plus Ethernet components. Power dissipation is determined by temperature, supply voltage, and external source/sink requirements. Note: All current consumption and power dissipation values were measured at VDD33IO and VDD33A equal to 3.3V. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |