REV. A

–6–

AD9882

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although the

AD9882 features proprietary ESD protection circuitry, permanent damage may occur on devices

subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended

to avoid performance degradation or loss of functionality.

ORDERING GUIDE

Temperature

Package

Model

Range

Option

AD9882KST-100

0

∞C to 70∞C

ST-100

AD9882KST-140

0

∞C to 70∞C

ST-100

AD9882/PCB

25

∞CEvaluation Board

ABSOLUTE MAXIMUM RATINGS

*

Digital Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 V to 0.0 V

Digital Output Current . . . . . . . . . . . . . . . . . . . . . . . . 20 mA

Operating Temperature . . . . . . . . . . . . . . . . –25

∞C to +85∞C

Storage Temperature . . . . . . . . . . . . . . . . . –65

∞C to +150∞C

Maximum Junction Temperature . . . . . . . . . . . . . . . . 175

∞C

Maximum Case Temperature . . . . . . . . . . . . . . . . . . . 150

∞C

*Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating; functional operation of the device

at these or any other conditions outside of those indicated in the operation sections

of this specification is not implied. Exposure to absolute maximum ratings for

extended periods may affect device reliability.

EXPLANATION OF TEST LEVELS

Test Level

I.

100% production tested.

II.

100% production tested at 25

∞C and sample tested at

specified temperatures.

III. Sample tested only.

IV.

Parameter is guaranteed by design and characterization

testing.

V.

Parameter is a typical value only.

VI.

100% production tested at 25

∞C; guaranteed by design

and characterization testing.