| データシートサーチシステム |
|
STM32L100C6 データシート(PDF) 47 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32L100C6 データシート(HTML) 47 Page - STMicroelectronics |
|
47 / 103 page ![]() DocID024295 Rev 5 47/103 STM32L100C6 STM32L100R8/RB Electrical characteristics 90 6.3.3 Embedded internal reference voltage The parameters given in the following table are based on characterization results, unless otherwise specified. Table 14. Embedded internal reference voltage calibration values Calibration value name Description Memory address VREFINT_CAL Raw data acquired at temperature of 30 °C ±5 °C, VDDA= 3 V ±10 mV 0x1FF8 0078-0x1FF8 0079 Table 15. Embedded internal reference voltage Symbol Parameter Conditions Min Typ Max Unit VREFINT out(1) Internal reference voltage – 40 °C < TJ < +85 °C 1.202 1.224 1.242 V IREFINT Internal reference current consumption - - 1.4 2.3 µA TVREFINT Internal reference startup time - - 2 3 ms VVREF_MEAS VDDA voltage during VREFINT factory measure - 2.99 3 3.01 V AVREF_MEAS Accuracy of factory-measured VREF value (2) Including uncertainties due to ADC and VDDA values -- ±5 mV TCoeff(3) Temperature coefficient –40 °C < TJ < +105 °C - 25 100 ppm/°C ACoeff(3) Long-term stability 1000 hours, T= 25 °C - - 1000 ppm VDDCoeff(3)(4) Voltage coefficient 3.0 V < VDDA < 3.6 V - - 2000 ppm/V TS_vrefint(3) ADC sampling time when reading the internal reference voltage -4 - - µs TADC_BUF(3) Startup time of reference voltage buffer for ADC -- - 10 µs IBUF_ADC(3) Consumption of reference voltage buffer for ADC - - 13.5 25 µA IVREF_OUT(3) VREF_OUT output current(5) -- - 1 µA CVREF_OUT(3) VREF_OUT output load - - - 50 pF ILPBUF(3) Consumption of reference voltage buffer for VREF_OUT and COMP - - 730 1200 nA VREFINT_DIV1(3) 1/4 reference voltage - 24 25 26 % VREFINT VREFINT_DIV2(3) 1/2 reference voltage - 49 50 51 VREFINT_DIV3(3) 3/4 reference voltage - 74 75 76 1. Guaranteed by test in production. 2. The internal VREF value is individually measured in production and stored in dedicated EEPROM bytes. 3. Guaranteed by characterization results. 4. Shortest sampling time can be determined in the application by multiple interactions. 5. To guarantee less than 1% VREF_OUT deviation. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |