| データシートサーチシステム |
|
STV2310 データシート(PDF) 59 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STV2310 データシート(HTML) 59 Page - STMicroelectronics |
|
59 / 112 page ![]() 59/112 STV2310 Register List DDECCONT1 Register Description PIXMODE Pixel Mode Selection In Square Pixel mode, the number of Y, Cr and Cb components depends on the standard as shown in Table 12. The output line locked frequency (CLK_DATA) will also change according to the standard. 0: Normal Pixel mode (Default) 1: Square Pixel mode ACTEDGE Data is output from the STV2310 on the following pads: FIELD, VSYNC, HSYNC, PLLLOCK and YCRCB[7:0]. It is synchronous to the CLK_DATA output clock either on the rising or falling edge depending on this option. 0: Clock falling edge is active edge (Default) 1: Clock rising edge is active edge CVBSMUX Y/CVBS Input Selection 0: Y/CVBS1 input (Default) 1: Y/CVBS2 input OUTTRISTATE Pad Tristate Mode The pad tristate mode depends on the chip I2C address. If the I2C default chip address is chosen: 0: Output digital pads in Output mode (Default) 1: Output digital pads in Tristate mode If the I2C spare chip address is chosen: 0: Output digital pads in Tristate mode (Default) 1: Output digital pads in Output mode Note that only the following pads can be in Tristate mode: FIELD, VSYNC, HSYNC, PLLLOCK, CLK_DATA and YCRCB[7:0]. The I2C pads are never in Tristate mode. SVIDEOSEL CVSB/S-Video Selection The S-video mode notifies the STV2310 that the chroma and luma signals are already separated. 0: S-Video Input 1: CVBS Input (Default) 5060MODE[1:0] Vsync Search Mode and initial Free-running Mode These bits provide the starting point for the Vsync extraction mechanism. 50-Hz or 60-Hz input standards are expected. The options are to look exclusively for 50-Hz or 60-Hz standards (Forced 50 or 60) or to search for all standards with a priority in the search mechanism (Auto 50 or 60). 00: Auto 50: Automatic search mode starting with 50-Hz standards. (Default) 01: Forced 60: Search mode forced to 60-Hz standards only. 10: Forced 50: Search mode forced to 50-Hz standards only. 11: Auto 60: Automatic search mode starting with 60-Hz standards. Address (hex): 01h Reset Value (bin): 0011 1111 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 BLANKMODE[1:0] AUTOSTD[5:0] Bit Name Function |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |